New to brewing?

Know when your beer is ready. No guessing, no opening the lid.

The Float Pro floats in your fermentation and sends what's happening during the fermentation to your phone. So you know if your fermentation started, whether it’s on track, and when it’s safe to bottle.
When you start brewing, the first batches are exciting. There are a lot of new things to do and learn. The fermentation is where you put your soon-to-be beer in a black box, and cross your fingers.

My first Weizen Day 5 · on track
Density
1.014
Temperature
19.4 °C
target finish 1. Yeast wakes up 2. Busy eating sugar 3. Ready for next step

Brewing beer in four steps.

Every beer, from a starter kit to a beer that's made in a craft brewery, goes through the same stages. Float Pro watches the third step: the part that takes the longest and that you can't see.

  1. 1

    Brew day

    Heat grain (or malt extract from your kit) in water to extract sugars. The resulting sweet liquid is called wort.

  2. 2

    Add yeast

    Cool the wort, pour it into your fermenter and add yeast. This is the moment you drop in the Float Pro.

  3. 3

    Fermentation

    In one to three weeks the yeast turns sugar into alcohol and CO₂. Float Pro tracks this process every 15 minutes.

  4. 4

    Bottle and enjoy

    Once fermentation is finished, you bottle. Bottle too early and you risk overcarbonated or even bursting bottles.

A hydrometer tells you how much sugar is left.

Sugar makes wort heavier than water. As yeast eats the sugar, alcohol is formed and the wort gets lighter. Brewers call that number SG(, or °Br, or °Plato).

Your recipe tells you the numbers for the start and the end of your fermentation. The Float Pro shows you these numbers. It also tells you where you are in between, and when the number stops moving.

1.0501.010
Start (OG)
Lots of sugar, no alcohol yet
Alcohol: 0 %
Finish (FG)
Sugar turned into alcohol
Alcohol: ~5.3 %

Prefer other units? Like Plato or Brix? You can switch units in myBrewbrain.

The three questions every new brewer asks.

Float Pro answers them with one look at your phone. And if something looks off, you’ll see it in time to fix it.

Has fermentation started?

day 1-2

The line starts dropping within a day or two. 👍

Still flat? Usually the temperature is off or the yeast needs help. Act now to save the batch.

Is it fermenting well?

temperature

A steady drop and a temperature that stays close to what your yeast likes. 👍

Dropping very fast and getting warm? Cool it down a little to avoid off-flavours.

When will fermentation finish?

target from your recipe

The line is flat for a few days, close to your recipe’s target. Time for the next step. 👍

Flat but far above target? Fermentation may have stalled. Gently waking the yeast often helps.

Read the full guide to fermentation curves

Your starter kit’s hydrometer vs. Float Pro

Most kits come with a glass hydrometer. It works, but only gives you a single snapshot each time you open your fermenter.

Glass hydrometer Float Pro
How you measure Take a sample from the fermenter, read the scale, write it down somewhere Floats in your fermenter and measures every 15 minutes, data recorded automatically
Risk of infection High, every sample means opening the fermenter Low, the fermenter stays closed
Beer lost A little with every sample None
While you sleep or are away No readings Keeps measuring, view it anywhere
Spotting problems Only if you happen to sample at the right moment Visible on the curve, so you can act in time
Learning for next time Whatever you wrote down Every batch saved for free in myBrewbrain

Good to know before you order

Is Float Pro worth it if I’m just starting out?

Beginners benefit the most. Your first batches are where a stuck fermentation or bottling too early is most likely. Float Pro shows you in time. Not convinced after using it? You have 30 days to return it for your money back.

Does it work with the bucket from my starter kit?

Yes. Float Pro works in plastic buckets, glass carboys and stainless steel fermenters, as long as it can float freely. Minimum liquid depth and diameter is 19 cm.

What else do I need?

A Wi-Fi network (2.4 GHz) and a charger. A charger is not included: any Qi wireless charger or USB-C charger works. Most people already have one at home.

My fermenter is in the shed or basement. Will that work?

If your phone gets Wi-Fi there, Float Pro will too. And if the connection drops for a while, Float Pro stores its readings and sends them once it’s back online.

Is setup difficult?

No. Setup takes around 5 minutes: Connect it to your Wi-Fi, create a free myBrewbrain account and drop it in your fermenter. It comes calibrated from the factory. Our setup video walks you through it.

Should I keep my glass hydrometer?

Float Pro is all about following the trend: when it starts, how fast it goes, when it stops. Many brewers like to double-check their starting and final number with their glass hydrometer.

Questions? Real people, real help.

No question is too basic. We’re brewers too, and we help you long after your purchase.

Start tracking your next batch

Ships in 3–5 days across Europe, with a 30‑day money‑back guarantee and a 2‑year warranty.

€ 129,95Add to cart

In stock · ships in 3–5 days across Europe